Skip to content

Testing mode: This site is still experimental. I’m testing and improving the content and tools.

(Updated )

By Dan Gold · Sources reviewed

Stop Rugs from Slipping with Alien Rug Grips

See how Alien Rug Grips help hold a sliding rug in place, how to apply them, and when a full rug pad may be a better fit.

interiorssafety

If a small rug slides every time someone walks across it, Alien Rug Grips are the fix I’d try first. They’re pre-cut, double-sided pads that attach beneath the rug and grip the floor, so there’s no need to put caulk on the rug backing. Check the current package for quantity, size, supported surfaces, and installation instructions; variants can differ.

I may earn a commission if you buy through the link below. As an Amazon Associate I earn from qualifying purchases.

Shop Alien Rug Grips on Amazon.

Why I recommend the pads

The appeal is simple: you can place a grip where the rug actually moves, especially at a corner that lifts or an edge that creeps forward. If your package describes a removable or reusable grip, follow its cleaning and removal instructions rather than assuming all versions behave the same way. That’s more practical for a rug you may want to move or clean than a permanent DIY coating. The linked listing describes use on hardwood and tile; that seller claim does not establish compatibility with your particular floor finish. Check both the floor maker’s care instructions and the grip package before applying it.

How to put Alien Rug Grips on a rug

  1. Clean and completely dry the floor and the underside of the rug.
  2. Lift the problem corner and attach a pad to the rug backing, following the package directions for which side faces the rug and any waiting time before use. Repeat at other corners or edges that move.
  3. Lower the rug and press each pad firmly against the floor. Walk across the rug and check that it stays flat; add pads where it still shifts.

If the rug is thick, heavy, or sliding across a large area, a properly sized full rug pad may give more even support. Check the grips periodically and replace any that stop holding or leave an edge raised. A rug should lie flat before you consider the job done.

Check the result

Test the rug gently after the package’s required setting time. Check for sliding, raised corners, and any change in the floor finish. Do not use adhesive grips where the floor or rug maker prohibits them. A compatible full rug pad is another option, especially for broad movement. The product listing was checked for identity during this review. Seller offers and stock can change; I have not verified hands-on performance or removal from your floor.

Sources and scope

These references support the guidance above. Source review is not a hands-on test of your home or a certification of a product. Follow the instructions for your exact model and local requirements.